L.N. Palupi, T. Winarno, A. Pracoyo, L. Ardhenta
In general, Photovoltaic (PV) array is not able to generate maximum power automatically, because some partial shading caused by trees, clouds, or buildings. Irradiation imperfections received by the PV array are overcome by applying Maximum Power Point Tracking (MPPT) to the output of the PV array. In order to overcome these partial shading problems, this system is employing Firefly Algorithm (FA) as MPPT method. It optimizes the output power of the solar PV array by Zeta Converter. Output voltage of MPPT has high rate such that it needs stepdown device to regulate certain voltage. Constant voltage will be the input voltage of Buck Converter and controlled using Adaptive PID. Adaptive control based on MRAC has design that almost same as the conventional PID structure and it has better performance in several conditions. The proposed system is expected to have stable output and able to perfectly emulate the response of the reference model. From the simulation results, it appears that FA have high tracking accuracy and high tracking speed to reach maximum power of PV array. In the output voltage regulation, adaptive control does not have a stable error status and consistently follows the set point value. © Published under licence by IOP Publishing Ltd.
Department of Electrical Engineering, State Polytechnic of Malang Soekarno Hatta, St. 9, Malang, Indonesia; Department of Electrical Engineering, Brawijaya University, MT Haryono St. 167, Malang, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock