A. Parastiwi, P.C.M. Al-Akbary, H.K. Safitri
The proposed electric bike is driven by using a 24V350WDC motor and VRLA 24V battery as a source of voltage. Input point settings are done by pressing the speed control button in the form of digital data, which is then converted to voltage by the microcontroller. The output of the microcontroller in the form of a PWM becomes input for the motor driver, where the output speed of the motor will be detected by the speed sensor. The automation used is the PI method using the Zeigler Nichols 2 tuning formula. The control method using PI had been analyzed and tested, resulting in Kp=3.37 and Ki=0.73. The electric bike has been tested with different loads. The proposed electric bike was successfully controlled and able to be driven with a minimum speed of 5km/h and a maximum speed of 20km/h. © Published under licence by IOP Publishing Ltd.
Department of Electronics Engineering, Politeknik Negeri Malang, Indonesia